久|彩票网站

                        Moldmaking & Casting Materials
                        Ph. 561-588-1001



                        Moldmaking
                        Rubbers and
                        Materials
                        Moldmaking Rubbers
                        Casting Resin
                        Shelf Life Extender
                        Mold Releases
                        Urethane Rubbers
                        Silicone Rubbers
                        Polyurethane Casting Resin
                        Poly-Purge Gas Blanket Spray
                        Waxes
                        PVA
                        Aerosols

                        View our MOLD RELEASES.......................>>

                        Polyurethane RTV Mold Rubber
                        The 74-30 is the softest of our RTV rubbers. These rubbers can be used for making
                        durable, easy releasing molds for casting gypsum plasters, waxes, cement, epoxy resins
                        polyester resins along with urethane and acrylic. Proper
                        mold release is needed to
                        insure easy parting from the mold.

                        74-30 RTV Liquid Urethane
                        Mold Rubber
                        Mixed 1 Part A to 1 Part B
                        Working Time: 30 Minutes
                        Demold Time: 24 Hours
                        Hardeness, Shore A: 30

                        Info: Our softest polyurethane. Fairly soft and stretchable. Good for molds with complex shapes or detail that might require an easily flexible rubber.

                        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                        74-30 Is Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-74301
                        16oz Kit (8oz A + 8oz B)
                        $15.00
                        POLY-74302
                        32oz Kit (2 LBs)
                        $25.00
                        POLY-74303
                        2 Quart Kit (4 LBs)
                        $42.00
                        POLY-74304
                        1 Gallon Kit (8 LBs)
                        $70.00
                        POLY-74305
                        2 Gallon Kit (16 LBs)
                        $114.00
                        POLY-74306
                        10 Gallon Kit (80 LBs)
                        $430.00

                        Kit sizes above show total volume included in kit
                        with total weight in parentheses.


                        Product Data Sheets
                        74-30 Product Bulletin

                        74-30 Part A-- MSDS
                        74-30 Part B-- MSDS

                        75-60 RTV Liquid Urethane
                        Mold Rubber

                        Mixed 1 Part A to 1 Part B
                        Working Time: 15 Minutes
                        Demold Time: 12 Hours
                        Hardness, Shore A: 60

                        Info: A medium hardness polyurethane. Similar in hardness to a pencil eraser. The cured rubber will flex but has very little stretchability.

                        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                        75-60 Is Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-75601
                        16oz Kit (8oz A + 8oz B)
                        $15.00
                        POLY-75602
                        32oz Kit (2 LBs)
                        $25.00
                        POLY-75603
                        2 Quart Kit (4 LBs)
                        $42.00
                        POLY-75604
                        1 Gallon Kit (8 LBs)
                        $70.00
                        POLY-75605
                        2 Gallon Kit (16 LBs)
                        $114.00
                        POLY-75606
                        10 Gallon Kit (80 LBs)
                        $430.00

                        Kit sizes above show total volume included in kit
                        with total weight in parentheses.

                        Product Data Sheets
                        75-60 Product Bulletin

                        75-60 PART A -- MSDS
                        75-60 PART B-- MSDS

                        75-80 RTV Liquid Urethane Mold Rubber
                        Mixed 2 Parts A to 1 Part B
                        Working Time: 45 Minutes
                        Demold Time: 24 Hours
                        Hardness, Shore A: 80

                        Info: A very hard polyurethane rubber. Very close in hardness to a car tire. Best for flat molds with minimal detail. Also can be used for certain concrete stamping applications.

                        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                        75-80 Is Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-75801
                        24oz Kit (16oz A + 8oz B)
                        $21.75
                        POLY-75802
                        48oz Kit (3 LBs)
                        $37.25
                        POLY-75803
                        3/4 Gallon Kit (6 LBs)
                        $60.50
                        POLY-75804
                        1 1/2 Gallon Kit (12 LBs)
                        $97.50
                        POLY-75805
                        3 Gallon Kit (24 LBs)
                        $166.50
                        POLY-75806
                        15 Gallon Kit (120 LBs)
                        $620.00

                        Kit sizes above show total volume included in kit
                        with total weight in parentheses.

                        Product Data Sheets
                        75-80 Product Bulletin

                        75-80 PART A -- MSDS
                        75-80 PART B-- MSDS

                        75-90 RTV Liquid Urethane Mold Rubber
                        Mixed 2 Parts A to 1 Part B
                        Working Time: 10 to 15 Minutes
                        Demold Time: 24 Hours
                        Hardness, Shore A: 90

                        Info: 75-90 is our hardest and strongest polyurethane rubber. It is used for making tough, durable molds, liners and stamps for casting, forming and texturing concrete. This firm rubber is also popular for making industrial parts, rollers, gaskets, bumbers, pads, and more.
                        If tinting this rubber is desired, we sell a selection of tinting colors here:
                        COLORED PIGMENTS

                        Mold Release Info: For releasing this rubber from a smooth non-porous original/plug an aerosol such as Poly-2300 or Stoner is suitable. Porous objects such as plaster, concrete or wood should first be sealed to create a smooth surface from which to apply the mold release.

                        75-90 Is Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-75901
                        24oz Kit (16oz A + 8oz B)
                        $23.00
                        POLY-75902
                        48oz Kit (3 LBs)
                        $39.00
                        POLY-75903
                        3/4 Gallon Kit (6 LBs)
                        $63.50
                        POLY-75904
                        1 1/2 Gallon Kit (12 LBs)
                        $102.50
                        POLY-75905
                        3 Gallon Kit (24 LBs)
                        $175.00
                        POLY-75906
                        15 Gallon Kit (120 LBs)
                        $685.00

                        Kit sizes above show total volume included in kit
                        with total weight in parentheses.

                        Product Data Sheets
                        75-90 Product Bulletin

                        75-90 PART A -- MSDS
                        75-90 PART B-- MSDS


                        Polygel 35
                        Self Thickening RTV Liquid Urethane Rubber For Brush-On Molds
                        Polygel mold rubbers consist of two liquids, Part A and Part B which after mixing immediately gel to a brushable or trowellable consistency, then cure overnight at room temperature to a flexible, tough RTV rubber. They are ideal for molds built up with a brush, spatula or spray, Polygel mold rubbers are recommended for evaluation as a mold material for plaster, cement and waxes, as well as for limited casting with polyester epoxy and polyurethane resins.

                        Poly Gel 35
                        Mixed 1 Part A to 1 Part B
                        Hardness, Shore A: 35
                        Working Time: 8 to 10 Minutes
                        Demold Time: 24 Hours

                        Info: A self-thickening brushable mold rubber. Used primarily for blanket molds. Usually requires a mother mold backing to support the mold after it is made. Plaster or fiberglass and resin are commonly used for mother molds.

                        Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-GEL351
                        16oz Kit (8oz A + 8oz B)
                        $15.25
                        POLY-GEL352
                        32oz Kit (2 LBs)
                        $25.50
                        POLY-GEL353
                        2 Quart Kit (4 LBs)
                        $42.50
                        POLY-GEL354
                        1 Gallon Kit (8 LBs)
                        $71.00
                        POLY-GEL355
                        2 Gallon Kit (16 LBs)
                        $120.00
                        POLY-GEL356
                        10 Gallon Kit (80 LBs)
                        $483.00


                        Product Data Sheets
                        PolyGel 35 Product Bulletin

                        PolyGel35 Part A -- MSDS
                        PolyGel35 Part B-- MSDS



                        TinSil 70 Series RTV Silicone Mold Rubbers
                        Consists of a liquid Part B base and Part A accelerator which after mixing at the proper ratio by weight, cure at room temperature to a flexible high tear strength RTV silicone rubber. All TinSil 70 Series mold rubbers are tin-catalyzed, condensation-cure systems. They are ideal for molds where easy release or high temperature resistance is needed. They are recommended for evaluation as mold materials for polyester, epoxy and polyurethane resins and waxes. Mold release is not required for casting parts in silicone molds. A mold release wax may be needed when pouring the liquid silicone rubber onto a porous substrate such as wood or plaster. Should not be used with silicone based releases or lubricants.
                        70-25 Tin-Sil
                        RTV Silicone Mold Rubber

                        Mixed 10 parts B to 1 part A
                        Hardness, Shore A: 25
                        Pour Time: 60 min.
                        Demold Time: 24 Hours
                        Cured Color: Light Blue

                        Info: A very soft and stretchable silicone rubber. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

                        Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-70251
                        16oz Kit (1LB)
                        $ 26.50
                        POLY-70252
                        32oz Kit (2LB)
                        $ 41.00
                        POLY-70253
                        Gallon Kit (9LB)
                        $ 123.00
                        POLY-70254
                        5 Gallon Kit (44LB)
                        $ 421.00


                        Product Data Sheets
                        70-25 Product Bulletin

                        Tinsil 70 Series -- MSDS

                        70-60 Tin-Sil
                        RTV Silicone Mold Rubber

                        Mixed 20 parts B to 1 part A
                        Hardness, Shore A: 60
                        Pour Time: 30 min.
                        Demold Time: 24 Hours
                        Cured Color: Red

                        This mold rubber is well suited for casting low-temperature melting metals such as pewter. This rubber has a lower tear strength compared to the 70-25 but can withstand higher temperatures upto 400 degrees.

                        Info: A more rigid silicone rubber similar to the hardness of a pencil eraser. No mold release is required, however when making a mold from a porous surface such as wood the surface should be sealed or painted to avoid possible sticking.

                        Available in 2 Part Kits
                        Cat No.
                        Description
                        Price
                        POLY-70601
                        1LB Kit
                        (approx. 1 Pint)
                        $ 28.00
                        POLY-70602
                        2LB Kit
                        (approx. 1 Quart)
                        $ 43.00
                        POLY-70603
                        8.4LB Kit
                        (approx. 1 Gallon)
                        $ 123.00
                        POLY-70604
                        42LB Kit
                        (approx. 4-1/2 gallons)
                        $ 449.00


                        Product Data Sheets
                        70-60 Product Bulletin

                        Tinsil 70 Series -- MSDS

                        Poly Latex 60
                        One Part Brush-On Rubber for Casting Plaster, Concrete, and Some Resins.

                        Built up in multiple layers with thin coats. Previous layers must be allowed to cure before recoating.
                        Poly Latex 60
                        Cat No.
                        Description
                        Price
                        POLY-L603
                        5 Gallon (40 LBs)
                        $205.00

                        Please Note: Poly Latex is capable of freezing at low temperatures (below 45F). We do not recommend shipping by UPS Ground during winter months.

                        Product Data Sheets
                        Latex 60 Product Bulletin

                        Latex 60 -- MSDS


                        Hydrogel-Alginate
                        Mixed 3 Parts Water to 1 Part Hydrogel By Weight.
                        • Easy to Use, Just Add Water
                        • Variable Working Time
                        • Non-Toxic, OK-for Body Casts
                        • Early Strength for Fast Demold

                        DESCRIPTION: Hydrogel® is a dry white powder which when mixed with water at a 3 parts water to 1 part Hydrogel® weight ratio (approximately 1 water to 1 1/4 Hydrogel® by volume) yields a creamy mix with a 5 minute working time. Demolding can be done, with care, several minutes after mix can no longer be worked.
                        Mold Release: Use petroleum jelly for skin contact or
                        Poly-2300 aerosol spray for industrial parts.

                        Available in Pound Increments
                        Cat No.
                        Description
                        Price
                        POLY-HYD01
                        1 LB Tub
                        (approx 1/3 gallon)
                        $ 14.50
                        POLY-HYD02
                        2 LB Tub
                        (approx. 3/4 gallon)
                        $ 25.00
                        POLY-HYD12
                        12.5 Pound Pail
                        (approx. 5 gallons)
                        $ 116.00


                        Product Data Sheets
                        Hydrogel Product Bulletin

                        Hydrogel -- MSDS

                        Easy-Flo 60
                        Low-viscosity polyurethane casting resin.
                        • 2.5 Minute pot life
                        • 30 Minute Demold Time.
                        • Cured Color: White/Off-White

                        This fast setting casting resin creates a hard yet strong plastic for many uses.

                        It can be tinted with any of our
                        colored pigments, however color will be offset by the natural white color of the product.

                        Extremely fluid for all types of casting.
                        Favorable strength and low-brittleness.

                        No Mold release is necessary for casting into silicone molds.
                        Pol-Ease 2300 should be used as a release from polyurethane molds.

                        Sold in 2 Part Kits : Mixed 1 to 1
                        Cat No.
                        Description
                        Price
                        POLY-EF601
                        16oz Kit
                        $ 12.95
                        POLY-EF602
                        32oz Kit
                        $ 22.25
                        POLY-EF603
                        2 Quart Kit
                        $ 35.50
                        POLY-EF604
                        1 Gallon Kit
                        $ 58.50
                        POLY-EF605
                        2 Gallon Kit
                        $ 103.00
                        POLY-EF606
                        10 Gallon Kit
                        $ 397.00

                        Kit sizes above show total volume included.

                        Product Data Sheets
                        Easy Flo 60 Product Bulletin

                        EasyFlo 60 -- MSDS

                        Plasteline Clay
                        Plasteline clay is a non-drying, non-hardening, no-sulfur modeling clay for a variety of applications. It is non-toxic, sanitary, and odorless. This clay is easy to handle and work with and remains hand-pliable at room temperature. Keeps its smooth, firm consistency and retains the shape into which it is molded. Has many uses for sculpting, shaping or moldmaking

                        Pale green in color
                        Each 2LB Block is approx: 5" x 2.5" x 2.5" in size.
                        Cat No.
                        Description
                        Price
                        KLY-02
                        2 LB Block
                        $8.00/Block
                        KLY-50
                        40 LB Pack (40lbs)
                        $143.00


                        MSDS
                        Klean Klay -- MSDS

                        Poly-Purge
                        Aerosol Dry Gas Blanket for extending the life of polyurethane rubbers.
                        Usage:
                        Poly Purge can be sprayed into an open container just before resealing the lid to displace moist air, thus extending the life of polyurethane liquids. Poly Purge is heavier that air and is nonflammable and non-ozone depleting. It is packaged in an aerosol-type can for directing the gas into the desired space.

                        Sold by the can or by the case of 12 cans
                        Cat No.
                        Description
                        Price
                        POLY-P10
                        10oz Can
                        $ 14.50
                        POLY-P10CSE
                        Case of 12 Cans
                        $ 150.00


                                              Real estate

                                              news

                                              Foreign exchange

                                              Buddhism

                                              culture

                                              culture

                                              Premier League

                                              Buddhism

                                              Mobile Games